Products

Flashings

All Flashings can be manufactured according to specification.

Flashing

Closure Flashings

Ridge Capping

Curved Flashing

Roll Top

Corned Trim

Closures

Material Used

Colourplus
Colourbond
Zincalume / Zincal
Galvanised
Aluminium (Millfinish / Pre-Painted)
Stainless Steel

Colour Chart

Gutters and Downpipes

We manufacture an extensive range of standard gutters, downpipes and accessories. Custom made gutters and downpipes are designed and manufactured to suite your individual project specifications.

WhatsApp Image 2025-04-03 at 13.40.22_695ecd09

Seamless Aluminium Gutters & Downpipes in George & Gqeberha

Stainless Steel

Aluminium

Az 150 C1S

Standard Sheet Sizes

925mm x 3000mm x (0.5mm; 0.58mm; 0.55mm or 0.8mm)
2450mm x 1225mm x (0.8mm; 1.0mm; 1.2mm; 1.6mm; 2.0mm; 2.5mm or 3.0mm)
2500mm x 1250mm x (0.58mm; 0.8mm; 0.9mm; 1.2mm; 1.5mm or 2.0mm)

We have well trained teams responsible for the aluminium guttering.
They have the specialized ability to supply and install these purpose made gutters.

Material Used

Colourplus
Colourbond
Zincalume / Zincal
Galvanised
Aluminium (Millfinish / Pre-Painted)
Stainless Steel

Colour Chart

Louvres

All Louvres are made according to client specifications.
Louvres can also be manufactured as triangular or circular.

Custom Louvres

Material Used

Colourplus
Colourbond
Zincalume / Zincal
Galvanised
Aluminium (Millfinish / Pre-Painted)
Stainless Steel

Colour Chart

Ventilators

Naturally static vents, fixed on the Ridge or slope of the roof, that allows hot air to escape from a building’s attic and allows the heat and smoke, due to fire inside the building, to escape for a limited time period

Continuous Ridge Ventilator

A Continuous Ridge ventilator runs along the entire length of the roof pitch, blending into the roof line, which allows warm, humid air to escape the building through the attic.

Ridge Ventilator

A Ridge ventilator is a roof-mounted unit that is installed on the roof pitch to allow warm and humid air to escape the building through the attic. Unit sizes vary from 2.5m to 3m lengths for transport and installation purposes.

Slope Ridge Ventilator

Slope Mounted ventilators are typically units that are mounted and installed on the slope of the roof sheet to allow warm and humid air to escape the building. The unit sized for slope mounted ventilators vary and are made to client specification.

Assembly Instructions

Fit side stack 1 between end cap 5 and stack baffles 4 and fix to ridge purlins through sheeting
Fit weathering cap 3 between end cap 5 and stack baffle 4 at +/- 1500mm centres on angle cleat 6 on end cap and stack baffle. Ensure that silicone is applied between the cleat and the top surface of the weathering cap
Suction bands 2 are then fitted to end cap 5 and stack baffles 4 through pre-drilled holes.
This is carried on until the other end cap 5 is reached.
Please ensure that silicone is properly applied to prevent any leakages.